top of page

Create Your First Project

Start adding your projects to your portfolio. Click on "Manage Projects" to get started

.pro-gallery-wix-wrapper {display: block !important;} .pro-gallery-wix-wrapper .gallery-item-container {opacity: 1 !important; display: block !important;}

Williams "HIGH SPEED" Hardcoat Coating

Project type

Renovate the playing field

Date

Sept. 2024

Here I demonstrate how to resurface the playfield of a Williams High Speed pinball machine using a HardTop 2.0 coating. https://www.outsideedgeproducts.com/

This is what he looked like before

This is what he looked like before

Extreme wear and tear and too poor a base material to retouch.

Extreme wear and tear and too poor a base material to retouch.

The playing field must be sanded down to the wood, especially the printing on the inserts.

The playing field must be sanded down to the wood, especially the printing on the inserts.

I coat the bare wood several times with a special PU lacquer. This evens out any remaining imperfections and optimally prepares the surface for the hardcoat.

I coat the bare wood several times with a special PU lacquer. This evens out any remaining imperfections and optimally prepares the surface for the hardcoat.

The hardcoat coating is adjusted and fixed.

The hardcoat coating is adjusted and fixed.

The first half is glued on. The hardtop is a printed, self-adhesive 2mm thick Lexan film.

The first half is glued on. The hardtop is a printed, self-adhesive 2mm thick Lexan film.

Peel off the protective film and be amazed ;-)

Peel off the protective film and be amazed ;-)

.pro-gallery-wix-wrapper {display: block !important;} .pro-gallery-wix-wrapper .gallery-item-container {opacity: 1 !important; display: block !important;}

bottom of page